Page 1315 - Softbound_Edition_19_en
P. 1315

Proportional throttle valve
 Proportional throttle valves                                                           Proportional throttle valves

 SCREw-IN CARTRIDGES INSTALLED  REMARK!  Proportional throttle valve  nG10
 The following screw-in cartridges are used in either the flange body or the sandwich   Detailed  performance  data  and  additional   Flange and sandwich construction  ISO 4401-05
 body:  hydraulic and electric specifications may by   •  Direct operated, not pressure compensated
 drawn from the data sheets of the correspon-
 Type   Designation   Data sheet no.  Q max *  ding installed screw-in cartridge.  •  p max  = 350 bar
 DNPPM22   normally closed   2.6-531   32 l/min
 DNPPM22-../ME  normally closed,  CAUTION!
    with integrated electronics   2.6-541   32 l/min  The performace data, especially the „pressu-
 re-flow-characteristic„ on the data sheets of
 the screw-in catridges,  refer to the screw-in
 * Can deviate from the values on the data sheets of the screw-in cartridges..  cartridges only. The additional pressure drop
 of the flange body, resp. sandwich body must
 be taken into consideration.

 SyMBOLS / DIMENSIONS
 Flange construction DN.FA06-A/B  DESCRIPTION  FunCtion                           APPLiCAtion
 DN.FA06-A/B  DN.SA06-A  21.5  19  Directly  operated  proportional  throttle  valve   The force controlled proportional solenoid run-  Proportional  throttle  valves  are  suitable  for
 23  10  17.8  in sandwich construction. Screw-in cartridge   ning in the fluid acts directly on the control spool   precise  feed  control  systems.  An  extremely
            M33x2 in accordance with ISO 7789. In sand-  which opens or closes the triangular shaped   sensitive opening and closing response allows
            wich types for A and B line, a by-pass check   throttling  notches  in  the  cartridge  body. The   a smooth control of movements in stationary
 T
 Ø 9.5  Ø 5.5  46  31  21  A  B  32.5  ∗  valve for reversed free flow is incorporated. The   throttle opening, and therefore the flow volume,   or  mobile  installations,  e.g.  machine  tools,
            flange body is painted, the sandwich plates are
                                               changes proportionally to the current absorption
                                                                                  public vehicles.
 DN.SA06-P  DN.SA06-B  P  23  phosphatised.    of the proportional solenoid. When the solenoid
 (5)  41  32                                   is without current, the control spool is held in
 46  64                                        the closed position by a spring.
                                               To control the valve proportional amplifiers are
 Sandwich construction DN.SA06-P, T            available from Wandfluh (see register 1.13).
 20
 DN.SA06-T  DN.SA06-AB  T  B  ∗
 Ø 5.5  45  A  TyPE CODE
 P  22.5      Throttle valve                                                  D  N  P   A10  -   -             #
 P= 21.5 / T=27  32  (66)  Normally closed
 48.5  1.5  98  Proportional

 Sandwich construction DN.SA06-A, B, AB  Flange construction  F
 A,AV=102   Sandwich construction                    S
 18  20  (70)  32  International standard interface ISO, NG10
            Type list / Function
 T          Flange construction   Sandwich construction
 Ø 5.5  ∗  A  B  ∗  A → B   A/B   in P   P    in A      A


                                              in B
                                                        B
                             in T
                                       T
 18
 P                                            in A and B  AB
 B,BV=102   Nominal volume flow level, nominal voltage, etc. of the built-in screw-in cartridge
 38.5  1.5  AB,ABV=140  Examples:          DNPFA10 - A/B -  32 - G24/WD - HB0
 PARTS LIST                                 DNPSA10 - P -   63 - G12/ME-A1D1
            Design-Index (Subject to change)
   Position   Article    Description
   10   160.2093   O-ring ID 9,25x1,78  GENERAL SPECIFICATIONS
   20   173.3650   Sealing plate ADB6  Description       Proportional throttle valve
            Nominal size       NG10 acc. to ISO 4401-05
            Construction     Flange and sandwich
 ∗ The envelop dimensions of the screw-in cartridge are shown on   Operations       Proportional solenoid
 their corresponding data sheets.  Mounting       4 mounting holes for. zyl.screws M6 or
                             double ended screws M6
            Connection       Threaded connection plates
                             Multi-flange subplates
 ACCESSORIES                 Longitudinal stacking system
 Proportional amplifier   Register  1.13  Weight       Depending on the type m = 3,0...6,0 kg
 Technical explanation see data sheet 1.0-100









 Wandfluh AG   Tel.  +41 33 672 72 72   E-mail:  sales@wandfluh.com   Illustrations not obligatory   Data sheet no.   Wandfluh AG   Tel.  +41 33 672 72 72   E-mail:  sales@wandfluh.com   Illustrations not obligatory   Data sheet no.
 Postfach   Fax  +41 33 672 72 12   Internet:  www.wandfluh.com   Data subject to change   2.6-740E 2/2   Postfach   Fax  +41 33 672 72 12   Internet:  www.wandfluh.com   Data subject to change   2.6-760E 1/2
 CH-3714 Frutigen                   Edition 14 10  CH-3714 Frutigen                                      Edition 14 10
                                                                                                           Page 1315
   1310   1311   1312   1313   1314   1315   1316   1317   1318   1319   1320