NEWS

With the new spool valve, directional functions in the nominal size of 4 can now be realised for zone 0. The valve is available as 4/3 and 4/2-way function and as a detented version. With a leakage of less than 20 ml/min at 120 bar, the valve is ideally suited for applications where small leakages play an important role. The valve with the designation WDZFA04 is also ideally suited for pilot…

The cartridge valve in the nominal size of U10 controls the manually adjusted output pressure independently of the input pressure and the volume flow. Through the 3-way function, overpressures at the output of the valve can be actively relieved against the tank. This guarantees, at all times, a stable pressure on the consumer in the system. The optimised valve design results in very good…

The tried and tested flow control valve in the nominal size M33 is now also available in a normally open execution. The valve is used in applications where maximum flow is required when the solenoid is in a deenergised state. Via the solenoid current, the proportional valve can continuously adjust volume flows up to 70 l/min. The integrated load compensation controls the volume flow outstandingly…

The new pressure reducing valve regulates output pressures from 0 to 200 bar proportionally to the adjusted solenoid current. The valve is used in applications where pressure must be regulated accurately independent of the input pressure.

Via the solenoid current, the proportional valve can continuously adjust pressures up to max 200 bar and be used for volume flows up to 25 l/min.

The complex…